Figure 18
1. Traction drive -neutral 3. Traction drive-engaged
(transport)
2. Traction drive neutral &
reel drive off
4. Traction drive & reel drive
engaged
3. Mo v e traction lev er to Eng ag ed position, increase
throttle speed until the mo w er is tra v eling at the
desired g round speed, dri v e the mo w er out onto
the g reen area, lo w er the front of the mo w er do wn
and commence operation ( Figure 18 ).
After Mowing
1. Dri v e off g reen, mo v e reel dri v e and traction
control lev ers to Diseng ag e and stop the engine .
2. Empty the g rass catc her of clippings , install g rass
catc her and commence transpor t operation.
18
To Next Page
Loading...
