Toro OSMAC G3 User Manual

2
Modes of Operation
The Toro OSMAC G3 Satellite can be placed in three operating modes: Central mode, Local mode and Off mode.
What’s Running
Manual Watering
Scheduled Watering
Communication
Diagnostics
Settings
Radio Monitor Sig
Page History
Radio Menu
Sat Address: 001
Comm Mode: Central
Receive Only Radio
Central
Radio Monitor Sig
Page History
Radio Menu
Sat Address: 001
Comm Mode:
Receive Only Radio
Local
Radio Monitor Sig
Page History
Radio Menu
Sat Address: 001
Comm Mode:
Receive Only Radio
Off
Central Mode – When placed in Central mode, the OSMAC G3 satellite will wait and execute radio commands
sent by the central. The satellite will ignore all scheduled watering but will execute manual watering.
Local Mode – When placed in Local mode, the OSMAC G3 will execute scheduled watering as well as manual
watering. Radio commands will be ignored.
Off Mode – When placed in Off mode, the OSMAC G3 will not execute any watering operation whether it is
scheduled or manually initiated. Any watering operation will terminate once the satellite is placed in Off mode.
Watering operations will resume once the satellite is placed back to Central or Local mode.
Setting the Clock and Mode
Clock Set
What’s Running
Manual Watering
Scheduled Watering
Communication
Diagnostics
Settings
Clock Set: 11:15am
Clock Mode: Am/Pm
Date Mode: MMDDYY
Date: 01/01/16 Fri
Sat Address: 001
Max Sim Sta: 05
11
Step 1 – While at the Home display, press Select
SELECT
SELECT
to access the controller menu.
Step 2 – Press DOWN until Settings is selected and press Select
SELECT
SELECT
.
Step 3 – Press DOWN until Clock Set is selected and press Select
SELECT
SELECT
to edit.
Step 4 – Use the LEFT and RIGHT buttons to navigate between the HOURS and MINUTES parameters.
To edit the values, use the
UP and DOWN buttons to increase or decrease the HOURS and
MINUTES.
Step 5 – Press Select
SELECT
SELECT
once the correct time is set.
Clock Mode
What’s Running
Manual Watering
Scheduled Watering
Communication
Diagnostics
Settings
Clock Set: 11:15am
Clock Mode: Am/Pm
Date Mode: MMDDYY
Date: 01/01/16 Fri
Sat Address: 001
Max Sim Sta: 05
Am/Pm
Step 1 – While at the Home display, press Select
SELECT
SELECT
to access the controller menu.
Step 2 – Press DOWN until Settings is selected and press Select
SELECT
SELECT
.

Toro OSMAC G3 Specifications

General

Brand	Toro
Model	OSMAC G3
Category	Marine Radar
Language	English