Toro Power Clear 418 - Paddle Replacement (All Models)

POWER PROPEL SYSTEM
Toro Single Stage Snow Service Manual
Paddle Replacement (All Models)
4-10
1. With the rotor assembly removed from the housing,
remove the Torx
™
fasteners (Fig. 023).
2. Remove the two inner bolts holding the paddle to the
rotor (A) (Fig. 024).
Fig. 023
Fig. 024
3. Remove the paddle. Be sure to remove the rotor
blade spacers (A) and install them in the
new paddles (Fig. 025).
4. Install new paddles and install rotor assembly back
into the housing.
Fig. 025