ProForce Debris BlowerPage 5 -- 2Blower Assembly
General Information
Operator’s Manual
The Operator’s Manual provides information regarding
the operation, general maintenance and maintenance
intervals for your ProForce Debris Blower machine. Re-
fer to the Operator’s Manual for additional information
when servicing the machine.
Electrical Power
Electrical power to ProForce Debris Blower compo-
nents is controlled by the Remote Control Module. To
make sure that machine operation does not occur unex-
pectedly, disconnect the negative battery cable from the
battery before performing any machine service (see
Battery Service in the Service and Repairs section of
Chapter 4 -- Electrical System).
Reattach the disconnected negative battery cable as
the last step in any repair. Secure cable with flange nut.
Torque nut from 10 to 15 ft--lb (14 to 20 N--m).
To Next Page
Loading...
