27
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Interval
Maintenance Procedure
Each Use
• Engine Oil—check the level
• Safety System—check
• Brake—check
• Engine—clean the engine screen
• Mower Housing—clean
After first 8 Hours
• Engine Oil—change
• Hydraulic Oil—check
8 Hours
• Mower Housing—clean
• Caster Wheels—grease
• Caster Pivot—grease
• Cutting Blades—check
25 Hours • Foam Air Cleaner—clean
1
40 Hours
• Tires—check pressure
• PTO Belt Idler Arm—grease
• Hydraulic Oil—check
50 Hours
• Belts—check for wear/cracks
• Paper Air Cleaner—clean
1
100 Hours
• Engine Oil—change
1
• Spark Plug(s)—check
• Electric Clutch—adjust
• Engine—clean cooling system
• Hydraulic lines—check
After first 200 Hours • Hydraulic oil filter—change
200 Hours
• Fuel Filter—replace
• Engine Oil Filter—change (200 hours or every other oil change)
• Paper Air Cleaner—replace
1
At storage or 400 Hours
• Hydraulic oil filter—change
• Chipped Surfaces—paint
• Perform all maintenance procedures listed above before storage
1
More often in dusty, dirty conditions.
Important Refer to your engine operator’s manual for additional maintenance procedures.
To Next Page