Maintenance
Replacing the Brush
1. Remove the 4 capscrews (8 x 60 mm), 8 washers
(8 mm), and 4 locknuts (8 mm) that secure the
groomer brush to the brush-adjustment bracket,
and remove the brush ( Figure 20 ).
g284816
Figure 20
1. Capscrew (8 x 60 mm) 4. Locknut (8 mm)
2. W asher (8 mm) 5. Groomer brush
3. Brush-adjustment bracket
2. Align the holes in the new groomer brush with
the holes in the brush-adjustment bracket
( Figure 20 ).
3. Assemble the brush to the bracket ( Figure 20 )
with the 4 capscrews (8 x 60 mm), 8 washers (8
mm), and 4 locknuts (8 mm) that you removed
in step 1 .
4. T ighten the capscrews and locknuts.
1 1
To Next Page
Loading...
