Thank you for purchasing SMRT Logic™, a SMRTscape™ device. The SMRT Logic Wireless Gateway
allows users to intuitively set up and control their irrigation systems from anywhere they have internet access
via the web or the SMRTscape app.
Connect Hardware
1
1. Connect Ethernet cable from your internet router
or switch to the port on the back of the SMRT
Logic.
2. Plug in the AC adapter.
3. SMRT Logic lights ash. Left LED should
eventually settle on solid green.
Solid Green - connected to the internet
Red - no internet connection
Green - ashes when data is
transferring to and from
the controller.
Additional LED color related information can
be found in the Troubleshooting section of this
document.
Register
2
1. Next, register your SMRT Logic.
Point browser to www.smrtscape.com.
2. Click the Register link.
3. Fill out all elds and press Register.
4. A verication email will be sent to the specied
e-mail address. Click the verication link in the
e-mail. You will be taken to the SMRTscape
website.
Click the Complete Registration button.
5. You will be taken to the sign in page.
Enter e-mail address and password
then click Sign In.
Setup in 4 Easy Steps!
SMRT Logic
Quick Reference Setup Guide
SMRT Logic
™
Quick Reference Setup Guide
Models: SMRT-T, SMRT-I
Models: SMRT-T, SMRT-I
©2016 The Toro Company Form Number 373-0875 Rev. B
To Next Page
General
