Toro SMRT Logic - User Manual

1
Thank you for purchasing SMRT Logic™, a
SMRTSCAPE™ device. The SMRT Logic Wireless
Gateway allows users to intuitively set up and
control their irrigation and lighting systems from
anywhere they have internet access via the
SMRTSCAPE website or app.
Quick Start
Connect Hardware
1
1. Connect Ethernet cable from your internet router
or switch to the port on the back of the SMRT
Logic.
2. Plug in the AC adapter.
3. SMRT Logic lights ash. Left LED should
eventually settle on solid green.
Solid Green - connected to the internet
Red - no internet connection
Green - ashes when data is
transferring to and from
the controller.
Additional LED color related information can be
found in the Troubleshooting section of this
document.
Register
2
1. Next, register your SMRT Logic.
Point browser to www.smrtscape.com.
2. Click Get Started.
3. Fill out all elds, agree to the SMRTSCAPE terms
and our privacy policy, and press Sign Up.
4. A verication email will be sent to the entered
e-mail address. Click the verication link in the
e-mail. You will be taken to the SMRTSCAPE
website.
Click the Complete Registration button.
5. You will be taken to the sign in page.
Enter e-mail address and password
then click Sign In.
SMRT Logic
™
Quick Reference Setup Guide
Models: SMRT-T, SMRT-I, A-SMRT-T
Table of Contents
Quick Start 1
Reference 5
Specications 13
Troubleshooting 13
Addendum:
Adding Supported Controllers 14

Toro SMRT Logic Specifications

General

Brand	Toro
Model	SMRT Logic
Category	Gateway
Language	English

Summary

Quick Start Guide

Connect Hardware

Connect Ethernet cable, plug in AC adapter, and check LED status.

Register SMRT Logic

Register the SMRT Logic device via the SMRTSCAPE website.

Setting a Location

Add New Location

Enter location name, description, and address details.

Add Gateway to Location

Enter Smart ID and Security Key to link gateway to location.

Adding a Controller

Add Irrigation Controller

Select controller type, enter name, description, and Smart Connect ID.

Setting an Irrigation Schedule

General Schedule Settings

Zone Configuration

Gateway Management

Edit Gateway Settings

Modify gateway settings like ID, synchronization, or network config.

Controllers Management

Add New Controller

Add supported irrigation controllers to the system.

Edit Existing Controller

Lights Control

Add LPCU Device

Add LPCUs for lighting control to the SMRTSCAPE website.

Edit LPCU Settings

SMRT Logic Troubleshooting

LED Behavior and Solutions

Explains LED status meanings and provides troubleshooting steps.

Addendum: Supported Controllers

Add Irritrol KD2 Controller

Steps to add Irritrol KD2 controller with Climate Logic receiver.

Add KD2 Mini-Receiver

Steps to add Irritrol KD2 controller with Mini-Receiver.

Configure KD2 Controller PIN