Toro SMRT Logic - Controllers Management; Add New Controller; Edit Existing Controller

9
The Zones tab allows the operator to quickly
monitor and control all zone activity for this
location.
A
Test All Zones: Run all zones sequentially
for the specied number of minutes each. This
is handy for troubleshooting or simply reviewing
sprinkler performance.
Press the Play icon when ready to begin irrigation.
B
Manual Operation:
Press the Play icon to
manually activate a specic
zone. Set the time to run and
press Start.
C
Manual Operation:
Press the Stop icon to
manually stop irrigation for a
specic zone.
D
Edit Zone. Press the gear icon to edit zone
information. It is possible to:
• change the zone description
• add an image for the zone
• specify if the zone uses a master valve and / or
pump
• specify the Cycle and Soak times.
Click Save when done.
A
B
C
D
The Controllers tab allows the operator to add new
controllers or edit existing controllers.
A
Add Controller: Allows the operator to add an
irrigation controller to the SMRTSCAPE website and/
or app. The SMRTSCAPE website and app support
the following controllers:
• Toro EVOLUTION
• Irritrol Rain Dial
• Irritrol KD II
• Irritrol Total Control
• Irritrol Kwik Dial
• Toro TMC-424
• Toro TMC-212
• Irritrol MC-E
• Toro Custom Command
• Toro EVOLUTION Ag
B
Edit Controller: Click the gear icon beneath
the desired controller.
A
B