7
The Irrigation Dashboard allows the operator to
quickly view the status of the controller, such as
what schedule is running and what zones are
active.
A
Alerts.Click the bell icon to read controller
alerts. Alerts include low battery notications and
more.
B
Running Mode. Click the power icon to change
the Running Mode of the controller.
• Auto On – The controller is functioning
normally.
• OFF (until manually turned on): No
irrigation will occur until the controller is set
back to Auto On.
• OFF - Resumes on next scheduled start:
• OFF – Resumes watering in X day(s):
C
Stop. Press this stop symbol to stop all
irrigation at this controller.
Stop All Irrigation Activity By Location
It is possible to stop all irrigation activity at a
location with one click (if multiple controllers are
used at one location, for example).
Click the stop sign by the Stop Location Irrigation
text.
A
B C
A
Start: Press the green ‘Play’ button to
manually start the irrigation
schedule for all zones
scheduled for that day. If no
irrigation is scheduled for
that day and you start the
schedule, then of course no
irrigation will occur.
B
Stop: Press the red
‘Stop’ button to stop all
irrigation activity at this
controller.
C
Edit a Schedule: Click
the gear icon to get to the
Edit Schedule screen.
Editing Schedules
General Tab
Description: Edit the description of Schedule A.
Water Days:
• Week Days: Choose the days of the week on
which irrigation will occur.
• Odd Days: Irrigation will occur on odd
numbered dates of the month.
• Even Days: Irrigation will occur on even
numbered dates of the month.
• Interval Days: Irrigation will occur at set
intervals; for example, every 3 days.
A
B
C
To Next Page
Loading...
