Toro STRIPE 21620 - Unfolding the Handle

3
UnfoldingtheHandle
NoPartsRequired
Procedure
WARNING
Foldingorunfoldingthehandleimproperlycandamagethecables,causinganunsafe
operatingcondition.
•Donotdamagethecable(s)whenfoldingorunfoldingthehandle.
•Ensurethatthecable(s)areroutedtotheoutsideofthehandle.
•Ifacableisdamaged,contactanAuthorizedServiceDealer.
Important:Removeanddiscardtheprotectiveplasticsheetthatcoversthemotorandanyother
plasticorwrappingonthemachine.
1.Removethehandleknobs(AofFigure5).
2.Usingtheholesattheendsofthehandle,attachthehandletothemachine(BofFigure5).
3.Movethehandlerearwardtotheoperatingposition(CofFigure5).
4.Ensurethatthecablesareroutedinfrontofthehandle(DofFigure5).
5.Engagethehandlelocksuntilthepinclicksinplacetolockthehandleintotheoperatingposition(Eof
Figure5).
Note:Youmayadjusttheheightofthehandlebychangingtheholeforthehandlelock.
6.Securetheknobstothehandleboltstosecurethehandle(FofFigure5).
10