Toro Super Recycler 20382 - Installing the Recoil-Starter Rope; Filling the Engine with Oil

G017479
Figure4
4.Lockthehandleatyourdesiredheight.Referto
AdjustingtheHandleHeight(page10).
5.Torquethehandleboltsto14to17N-m(120to160
in-lb).
6.Adjustthecuttingheight.RefertoAdjustingthe
CuttingHeight(page10).
2
InstallingtheRecoil-Starter
Rope
NoPartsRequired
Procedure
Important:Tostarttheenginesafelyandeasily
wheneveryouusethemachine,installtherecoil-starter
ropeintheropeguide.
Holdtheblade-controlbartotheupperhandleandpullthe
recoil-starterropethroughtheropeguideonthehandle
(Figure5).
Figure5
1.Recoil-starterrope2.Ropeguide
3
FillingtheEnginewithOil
NoPartsRequired
Procedure
Important:Yourmachinedoesnotcomewithoilin
theengine.Beforestartingtheengine,lltheengine
withoil.
1.Movethemachinetoalevelsurface.
2.Removethedipstick(Figure6)andpourabout3/4of
thecrankcasecapacityofoilintotheoil-lltube.
Note:Max.ll:0.55L(18.6oz),type:SAE30
detergentoilwithanAPIserviceclassicationofSF,
SG,SH,SJ,SL,orhigher.
6