Toro Super Recycler 20383 - Checking the Engine-Oil Level; Adjusting the Cutting Height

CheckingtheEngine-Oil
Level
ServiceInterval:Beforeeachuseordaily
Oilviscosity:SAE30orSAE10W-30detergentoil
APIserviceclassication:SJorhigher
1.Movethemachinetoalevelsurface.
2.Removethedipstick(Figure14).
g195250
Figure14
1.Full3.Low
2.High
3.Wipeoffthedipstickendwithacleancloth.
4.Insertthedipstickintotheoil-lltube,butdonot
screwitin,thenremovethedipstick.
5.Readtheoillevelonthedipstick(Figure14).
•IftheoilisbelowtheAddmarkonthe
dipstick,slowlypourasmallamountofoil
intotheoil-lltube,wait3minutes,andthen
repeatsteps3through5untiltheoillevelis
attheFullmarkonthedipstick
•IftheoilisabovetheFullmarkonthe
dipstick,draintheexcessoiluntiltheoillevel
isattheFullmarkonthedipstick.T odrain
theexcessoil,refertoChangingtheEngine
Oil(page22).
Important:Iftheoillevelinthecrankcase
istoolowortoohighandyourunthe
engine,youmaydamagetheengine.
6.Installthedipstickintotheoil-lltubesecurely.
AdjustingtheCutting
Height
WARNING
Adjustingthecuttingheightmaybringyou
intocontactwiththemovingblade,causing
seriousinjury.
•Stoptheengineandwaitforallmoving
partstostop.
•Donotputyourngersunderthehousing
whenadjustingthecuttingheight.
CAUTION
Iftheenginehasbeenrunning,themufer
willbehotandcanseverelyburnyou.Keep
awayfromthehotmufer.
Adjustthecuttingheightasdesired.Setallthe
cutting-heightleverstothesameheight.Toraiseor
lowerthemachine,refertoFigure15.
g189041
Figure15
11