Do you have a question about the Toro TimeCutter MX 5075T and is the answer not in the manual?
Cutting Width | 50 inches |
---|---|
Blade Tip Speed | 18, 000 FPM |
Spindle Material | Cast Iron |
Deck Type | Fabricated |
Transmission | Hydrostatic |
Fuel Capacity | 3 gallons |
Seat | High Back |
Tires (Rear) | 20 x 10-8 in (51 x 25.4-20.3 cm) |
Cutting Height | 1.5 - 4.5 inches |
Warranty | 3 years |