Need help?Do you have a question about the Toro TimeCutter SW3200 and is the answer not in the manual?
General| Cutting Width | 32 inches |
|---|---|
| Transmission | Hydrostatic |
| Warranty | 3-year limited |
| Fuel Capacity | 3.5 gallons |
| Type | Riding Mower |
| Cutting Height | 1.5 - 4.5 inches |
| Speed | Forward: 7 mph (11.3 km/h), Reverse: 3 mph (4.8 km/h) |
Provides essential safety guidelines for operating and servicing the equipment.
Details technical data, dimensions, and capacities for various models.
Lists specific engine models, horsepower, and high idle RPMs.
Covers oil capacity, level check, and fluid change for Hydro-Gear transaxles.
Explains fastener grades and provides torque values for metric and inch series.
Explains how to find the model/serial plate and details lubrication points.
Details the steps for disassembling the front axle and caster fork assembly.
Provides steps for removing the caster wheel, nut, bolt, and bushings.
Explains the procedure for removing and installing the right-hand fender.
Explains the procedure for removing and installing the left-hand fender.
Details the steps for removing and installing the fuel tank assembly.
Outlines the steps to remove the seat assembly from the unit.
Provides an exploded view and torque specifications for the steering column.
Details the step-by-step process for removing the front shroud.
Shows an exploded view of the steering system and related torque specs.
Guides through the process of aligning the steering system for proper function.
Details mounting procedures for the PTO clutch and clutch stop on engines.
Step-by-step instructions for removing the engine from the tractor.
Provides instructions to ensure the tractor drives straight and tracks correctly.
Details the steps required to remove the transaxle from the unit.
Provides step-by-step instructions for installing the transaxle assembly.
Provides step-by-step instructions for removing the mower deck.
Provides step-by-step instructions for installing the mower deck.
Explains how to level the 32-inch stamped deck side-to-side.
Explains how to level 42/50 inch stamped decks side-to-side.
Explains how to level 42-inch fabricated decks side-to-side.
Explains how to level 50-inch fabricated decks side-to-side.
Details the purpose, location, operation, and testing of the ignition switch.
To Next Page