Need help?Do you have a question about the Toro TimeCutter SW5425 and is the answer not in the manual?
General| Cutting Width | 54 inches |
|---|---|
| Deck Material | 10-gauge steel |
| Blade Tip Speed | 18, 000 fpm |
| Deck Type | Fabricated |
| Fuel Capacity | 3 gallons |
| Ground Speed Reverse | 4 mph |
| Cutting Height | 1.5 to 4.5 inches |
| Warranty | 3-year limited |
| Engine | 24.5 hp Toro V-Twin 708cc |
| Seat | 18 in (45.7 cm) Handcrafted High Back with Arm Rests – Lever Slide |
Covers essential safety practices for operating and maintaining the equipment, including personal protection.
Warns about hazards associated with batteries, including acid risks and potential explosions.
Advises clearing debris to prevent items from being thrown by the equipment during operation.
Emphasizes testing safety interlock systems after adjustments or repairs for safe operation.
Provides detailed technical specifications for various TimeCutter SW/SWX models.
Provides standard torque values for various fastener types, grades, and material considerations.
Provides steps for aligning the steering system for accurate, straight-line driving.
Step-by-step instructions for removing and installing the engine from the tractor.
Steps to adjust the tractor's tracking for straight-line driving without steering input.
Detailed steps for removing and installing the hydrostatic transaxle unit.
Guides for leveling the mower deck side-to-side and front-to-rear for optimal cutting.
Tips for troubleshooting the brake actuator module and its related electrical systems.
Procedures to test the electric PTO clutch's resistance and current draw.
To Next Page