Toro Titan MyRide 75313 - Safety; General Safety

BeltMaintenance................................................39
InspectingtheBelts..........................................39
ReplacingtheMowerBelt.................................39
MowerMaintenance.............................................40
BladeSafety.....................................................40
ServicingtheCuttingBlades.............................40
LevelingtheMowerDeck..................................43
RemovingtheMowerDeck...............................45
InstallingtheMowerDeck.................................45
ReplacingtheGrassDeector..........................46
Cleaning..............................................................47
CleaningtheSuspensionSystem.....................47
DisposingofWaste...........................................47
Storage...................................................................47
StorageSafety..................................................47
CleaningandStorage.......................................47
StoringtheBattery............................................48
Troubleshooting......................................................49
Schematics.............................................................51
Safety
Thismachinehasbeendesignedinaccordancewith
ANSIstandardB71.1-2017.
GeneralSafety
Thisproductiscapableofamputatinghandsand
feetandofthrowingobjects.Alwaysfollowallsafety
instructionstoavoidseriouspersonalinjury.
•Readandunderstandthecontentsofthis
Operator’sManualbeforestartingtheengine.
•Keepbystandersandchildrenaway.
•Donotallowchildrenoruntrainedpeopleto
operateorservicethemachine.Allowonlypeople
whoareresponsible,trained,familiarwiththe
instructions,andphysicallycapabletooperateor
servicethemachine.
•Donotoperatethemachineneardrop-offs,
ditches,embankments,water,orotherhazards,or
onslopesgreaterthan15°.
•Donotputyourhandsorfeetnearmoving
componentsofthemachine.
•Donotoperatethemachinewithoutallguards,
safetyswitches,andothersafetyprotective
devicesinplaceandfunctioningproperly.
•Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operator’sposition.Allowthemachinetocool
beforeservicing,adjusting,fueling,cleaning,or
storingit.
4