Workman 1100/1110/2100/2110Page 7 – 6Chassis, Wheels, and Brakes (Rev. B)
Brakes (continued)
ÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Brake lining is glazed or saturated.
Shoe–to–shoe spring(s) is (are) weak or broken.
Brake shoes are distorted.
Anchor plate is bent.
Brake drums and shoes are dusty.
Brake drums are scored or out–of–round.
Parking brake is set.
Brakes are incorrectly adjusted (Workman 1100 and 2100).
Shoe–to–shoe spring(s) is (are) weak or broken.
Brake pedal is binding.
Brake cable is binding (Workman 1100 and 2100).
Brake linings are saturated.
Brake drums are bent or out–of–round.
Brake pedal is hard to push.
Incorrect brake lining material.
Brake pedal linkage is binding.
Brake cable is binding (Workman 1100 and 2100).
Wheels lock–up when braking.
Brake linings are contaminated.
Brake linings are loose or damaged.
Wheel or transaxle bearings are damaged.
Shoe–to–shoe springs are weak.
Brake drums are grooved in the contact face with brake shoes.
Brake drums are overheated.
Brake linings are saturated.
Vehicle surges at slow speeds and
chatters at fast speeds.
Brake drums are bent or out–of–round.
Brakes do not self adjust.
Adjuster bolt is seized (Workman 1100 and 2100).
Adjuster lever does not engage star wheel (Workman 1100 and
2100).
To Next Page
Loading...
