MOWER
A6-6 XL Lawn Tractor Service Manual
13. Hook the idler spring from the idler pulley arm to the
eyebolt on the mower (Fig. A6 012).
Fig A6 012 fi g. 36 m-8207
14. Move the height-of-cut lever into the D notch to
make it easier to install the height-of-cut lift assist
spring.
16. Check the mower level; refer to Leveling the Mower
from Side-to-Side on page A6-7 and Front-to-Rear
Blade Slope on page A6-9.
Fig A6 013 fi g. 35 m-1851
15. Hook the lift assist spring between the mower right
side lift bracket and the retaining bolt (Fig. A6 013).
Note: Use the spring tool provided with the
machine.
A. Eyebolt C. Idler arm
B. Idler spring D. Idler pulley
A
B
C
D
A. Spring C. Spring tool
B. Bolt
A
B
C
To Next Page
Loading...
