Toro Z Master 7500-D Series - Page 6

8
CheckingtheDriveWheel
GearboxOil
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch,andengagetheparking
brake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Raisetherearofmachineandsupportitusing
jackstands(orequivalentsupport)justhigh
enoughtoallowthedrivewheelstoturnfreely.
4.Removethewheelandorientthegearboxwith
thedrainportonthebottomandllportontop
(Figure6).
5.Placeadrainpanundereachcheckport(Figure
6).
Removeandretainthecheckplug.
6.Ensurethattheoillevelisuptocheckportand
iscorrectconsistency.
7.Installthecheckplugwhencomplete.
3
4
2
1
g364528
Figure6
1.Wheelgearbox3.Drainplug
2.Checkplug
4.Fillplug
8.Repeatontheoppositeside.
Important:Donotoverllthegearbox;overlling
thegearboxmaydamageit.
6