Need help?Do you have a question about the Toro 74923 Z Master 6000 and is the answer not in the manual?
General| Horsepower | 25.5 hp |
|---|---|
| Cutting Width | 60 inches |
| Spindle Material | Cast Iron |
| Discharge Chute | Rubber |
| Drive Tires | 24 x 12-12 |
| Transmission | Hydrostatic |
| Deck Type | 7-gauge fabricated |
| Caster Tires | 13 x 6.5-6 |
| Ground Speed | 12 mph |
| Seat | Suspension Seat |
| Turning Radius | 0 |
| Blade Tip Speed | 18, 500+ ft/min (5, 640 m/min) |
Guidelines for safe use, training, and preparation.
Throttle, choke, ignition, motion levers.
Daily checks for safety system functionality.
Procedures for cleaning/replacing air filters.
How to check the engine oil level.
How to replace the fuel filter.
Procedures for battery maintenance.
How to adjust the parking brake.
Steps to replace the mower deck belt.
How to check hydraulic fluid level.
Ensuring the mower deck is level.
To Next Page