Toro Z Master Professional 5000 Series - Replacing the Mower Belt for Rear-Discharge Mower Decks

g009038
Figure98
1.Clutchpulley5.Squareholeintheidler
armfortheratchet
2.Mowerbelt
6.Idler-greasetting
3.Spring-loadedidlerpulley
7.Beltguide
4.Ratchet
10.Installthebeltguideontheidlerarm(Figure98).
11.Usingtheratchetinthesquarehole,installthe
idlerspring(Figure98).
Note:Makesurethatthespringendsare
seatedintheanchorgrooves.
12.Installthebeltcovers(Figure99).
g027730
Figure99
1.Positionthebeltcover.3.Ensurethatthetabis
underthemetalcatch.
2.Slidethebeltcoverunder
thesidecatches.
ReplacingtheMowerBelt
forRear-DischargeMower
Decks
ReplacingtheCounter-Rotating
Belt
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch(PTO),andengagethe
parkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Lowerthemowertothe76mm(3inches)height
ofcut.
4.Lifttheoorpanuptogainaccesstothecenter
pulley.
5.Removetheplasticbeltcover(Figure101).
6.Removethe3boltsholdingthemetalbeltcover
inplaceandremovethemetalbeltcover.
68