Toro Z Master Professional 7500-D Series - Page 3

g228816
Figure2
1.Fullline2.Addline
8.Replacethedipstickandthreadthellcap
nger-tightontothellerneck.
9.Checkallhosesandttingsforleaks.
5
CheckingtheDeck
Gearbox-FluidLevel
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Lowerthemowerdecktothe25mm(1inch)
heightofcut.
3.Disengagetheblade-controlswitch,movethe
motion-controlleverstotheNEUTRAL-LOCK
position,andengagetheparkingbrake.
4.Shutofftheengineandremovethekey.
5.Raisethedeck-liftpedaltoexposethetopofthe
mowerdeck.
6.Removethedipstick/llplugfromthetopofthe
gearboxandensurethatthelubricantisbetween
themarksonthedipstick(Figure3).
g231764
Figure3
1.Dipstick/llplug
7.Iftheuidlevelislow,adduiduntilthelevelis
betweenthemarksonthedipstick.
Important:Donotoverllthegearbox;
overllingthegearboxmaydamageit.
6
CheckingtheWheelLug
NutTorque
NoPartsRequired
Procedure
Beforeyoustarttheengineandusethemachine,
checkthewheellugnuttorque;refertoCheckingthe
WheelLugNutsintheOperator'sManual.
3