Toro Z Master Series - Procedure 18: Checking Machine for Grease; Procedure 19: Removing Shipping Straps

Figure30
18
CheckingtheMachinefor
Grease
Partsneededforthisprocedure:
1tube
Number2general-purposelithium-baseor
molybdenum-basegrease.(Purchaseseparately.)
Procedure
Beforeyouusethemachine,checkthemachineforgrease;
refertoLubricationintheOperator'sManual.
19
RemovingtheShippingStraps
NoPartsRequired
Procedure
Note:ThisprocedureisonlyformachineswithaMyRide
™
suspensionsystem.
WARNING
Thespringsarecompressedbytheshippingstraps.
Whenthestrapsarecut,theseatwillraiseup
quicklybyapproximately8.9cm(3-1/2inches).
Note:Ensurethestrapsareremovedbeforeoperatingthe
machine.
g030083
Figure31
13