EasyManua.ls Logo

Toro Z355 Z-Master - Safety

Toro Z355 Z-Master
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Page
Servicing the Castor Wheels and
Tail Wheel Bearings 45. . . . . . . . . . . . . . . . . . . . .
Checking the Tire Pressure 45. . . . . . . . . . . . . . . . .
Servicing the Hydraulic System 45. . . . . . . . . . . . .
Adjusting the Motion Controls 47. . . . . . . . . . . . . .
Replacing the Power Take Off (PTO) Belt 48. . . . .
Replacing the Traction Belt 48. . . . . . . . . . . . . . . . .
Replacing the Blower Belt 49. . . . . . . . . . . . . . . . . .
Turning Engine Lift Hook 49. . . . . . . . . . . . . . . . . .
Servicing the Fuse 49. . . . . . . . . . . . . . . . . . . . . . . .
Servicing the Battery 50. . . . . . . . . . . . . . . . . . . . . .
Cleaning the Hopper Screens 52. . . . . . . . . . . . . . . .
Cleaning the Hopper Full Sensor 52. . . . . . . . . . . . .
Wiring Diagram 53. . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Diagram 54. . . . . . . . . . . . . . . . . . . . . . . .
Cleaning and Storage 55. . . . . . . . . . . . . . . . . . . . . .
Troubleshooting 56. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The Toro Total Coverage Guarantee 60. . . . . . . . . . . . .
Introduction
Read this manual carefully to learn how to operate and
maintain your product properly. The information in this
manual can help you and others avoid injury and product
damage. Although Toro designs and produces safe
products, you are responsible for operating the product
properly and safely.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model and
serial numbers of your product ready. Figure 1 illustrates
the location of the model and serial numbers on the
product.
1
m–3220
Figure 1
1. Location of the model and serial numbers
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
This manual identifies potential hazards and has special
safety messages that help you and others avoid personal
injury and even death. Danger, Warning, and Caution are
signal words used to identify the level of hazard.
However, regardless of the hazard, be extremely careful.
Danger signals an extreme hazard that will cause serious
injury or death if you do not follow the recommended
precautions.
Warning signals a hazard that may cause serious injury or
death if you do not follow the recommended precautions.
Caution signals a hazard that may cause minor or
moderate injury if you do not follow the recommended
precautions.
This manual uses two other words to highlight
information. Important calls attention to special
mechanical information and Note: emphasizes general
information worthy of special attention.
Safety
This machine meets or exceeds the B71.4 1999
specifications of the American National Standards
Institute, in effect at time of production.
Note: The addition of attachments made by other
manufacturers that do not meet American National
Standards Institute certification will cause noncompliance
of this machine.
Improper use or maintenance by the operator or owner
can result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety alert symbol, which means
CAUTION, WARNING, or DANGER—“personal
safety instruction.” Failure to comply with the
instruction may result in personal injury or death.
This product is capable of amputating hands and feet and
throwing objects. Always follow all safety instructions to
avoid serious injury or death.
This product is designed for cutting and recycling grass or,
when equipped with a grass bagger, for catching cut grass.
Any use for purposes other than these could prove
dangerous to user and bystanders.

Table of Contents

Related product manuals