17
1-General Information: Check the App and
Controller Firmware versions and update them in
case there is a newer version available. The App
can be updated through the Play Store or App
Store (depending on whether you are using
Android or IOS). You can also see the
identification parameters of your controller, like
Bluetooth name, Hardware name, and Serial
number, as well as a version of the display.
2-Speed and Temperature Units: You can choose
between Metric and US Standard units. The
chosen units will be applied to other sections of
the App.
3-Sprocket Ratio: Change the sprocket tooth
count or ratio. This function comes in handy in
case you are using sprockets that are not the
same size as the stock Surron/Segway sprockets.
This option will affect the displayed speed, both
on the stock LCD and in the App.
4-Wheel Diameter: Choose the values that
correspond to your wheel. Wheel diameter will
affect the displayed speed.
WWW.TORPMOTORS.COM
5th Screen: APP SETTINGS
Use this screen to identify your controller and to adjust the general
settings. This screen is also useful in case of controller malfunctions,
since it allows you to share errors and ride logs with Torp support
team.
To Next Page
Loading...