Torque Limiting Screwdriver –TLS0022, Minor, Standard, TLS1360
2
Products:TLS0022, Minor, Standard, TLS1360
Mechanism Type:Slipping
ISO 6789 Designation: Type 2, Class F
Repeatability:+/-6% of Torque Setting
Calibration Period:Every 12 Months or 5000 cycles (minimum)
•Use only as a Torque Screwdriver.
•Do not use as a hammer, chisel or pry bar.
•Only hold the tool using the hand grip.
•For increased leverage, use the sliding T-Bar provided (TLS1360 Only)
•Always ensure that the screwdriver is in correct alignment withthe
fastener.
•Torque tools should be regularly calibrated and inspected to ensure
correct operation.
•Ensure the tool is clean and free of oil, grease and water before use.
•Never dip into cleaning fluid or petroleum.
Safety & Maintenance
Spare parts, servicing and calibration instructions are available from
Torqueleader. Please contact us or visit www.torqueleader.com for
further information.
Sales Hotline +44 (0) 1483 894476
To Next Page
Loading...