9
Set up
Basic Operation
Advanced Operation
Reference Selection
ADD/ERASE function
After performing the CH PROGRAM function, you can add or erase
specific channels.
1 Select the channel you want to erase
using the CHANNEL s or t button, or
select the channel you want to add using
the Channel Number buttons.
4
2 Press MENU (then s or t on Remote)
repeatedly until “ADD/ERASE” in the
Set up menu is displayed in purple.
TV/CABLE: TV CABLE
CH PROGRAM
ADD/ERASE: ADD ERASE
V-CHIP CONTROL
LANGUAGE: ENGLISH FRANCAIS
ESPANOL
MOVE[s t ] SELECT[T S ]
S
S
S
TV/CABLE: TV CABLE
CH PROGRAM
ADD/ERASE: ADD ERASE
V-CHIP CONTROL
LANGUAGE: ENGLISH FRANCAIS
ESPANOL
MOVE[s t ] SELECT[T S ]
S
S
S
To add the channel
Press the button until “ADD” is dis-
played in purple indicating that the chan-
nel has been memorized.
4 Repeat steps 1 to 3 for other channels.
You have now completed the channel programming.
TV/CABLE: TV CABLE
CH PROGRAM
ADD/ERASE: ADD ERASE
V-CHIP CONTROL
LANGUAGE: ENGLISH FRANCAIS
ESPANOL
MOVE[s t ] SELECT[T S ]
S
S
S
3 Press T (<) or S (>):
To erase the channel
Press the button until “ERASE” is dis-
played in purple indicating that the chan-
nel has been erased from the memory.
To Next Page
Loading...
Need help?
General
