Need help?Do you have a question about the Toshiba 1400XL Plus Series and is the answer not in the manual?
General| Voltage | 120V |
|---|---|
| Humidity | 0-95% non-condensing |
| Input Voltage Range | 90-140 VAC |
| Output Voltage | 120 VAC +/- 5% |
| Frequency Range | 50/60 Hz |
| Transfer Time | 6ms maximum |
| Battery Type | Sealed Lead Acid |
| Typical Recharge Time | 8 hours to 90% capacity |
| Communication Interface | USB |
| Operating Temperature | 0-40°C |
| Storage Temperature | -15°C to 50°C (5°F to 122°F) |
Explains the meaning of Danger, Caution, Attention, Electrical, and Explosion warning symbols used in the manual.
Provides critical safety instructions for UPS installation, operation, and battery handling.
Details how the UPS provides uninterrupted power during outages using internal batteries.
Details wiring diagrams for connecting the UPS to power distribution panels for various models.
Illustrates terminal block layouts and pin assignments for different UPS models.
Describes RS-232C and IBM AS/400 interfaces for UPS monitoring and control.
Explains different UPS operating modes like AC Input, Circuit Bypass, and Battery Backup.
Identifies non-fatal UPS faults, their display status, probable causes, and corrective actions.
Details fatal UPS faults, their display indicators, likely causes, and necessary actions.
To Next Page