To Next PageTo Next Page
Need help?Do you have a question about the Toshiba 16N3KV2-E1 and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | 16N3KV2-E1 |
| Category | Air Conditioner |
| Language | English |
Power supply cord and connecting cable requirements for general public use.
Installation guidelines for R410A refrigerant systems, warning against impurities.
Critical safety warnings for installation, indicating high risk of severe injury or death.
Warnings about improper installation causing water leakage, electrical shock, or fire.
Instructions for safe installation, avoiding water exposure, damage, or noise disturbance.
Requirement to report appliance installation to the local power supplier.
Details of optional parts included for installation, such as piping and insulating materials.
Guidance on securing the outdoor unit with bolts and nuts, and attaching drain components.
Criteria for selecting an appropriate installation location for the indoor unit.
Guidelines for placing the remote control to ensure proper signal reception.
Procedures for cutting holes and mounting the indoor unit's installation plate.
Instructions for connecting electrical wiring to the indoor unit.
Detailed steps for connecting the connecting cable to the indoor unit.
Steps for connecting the remote controller for wired operation.
Instructions for installing the piping and drain hose for the indoor unit.
Procedure for removing the drain hose from the indoor unit.
Method for removing the drain cap from the indoor unit.
Steps for correctly installing the drain cap onto the indoor unit.
Criteria for selecting an appropriate installation location for the outdoor unit.
Safety measures for installing the outdoor unit in areas with snow and cold weather.
Steps for connecting the refrigerant pipes to the outdoor unit.
Procedures for properly tightening refrigerant pipe connections using torque specifications.
Guidance on shaping refrigerant pipes to fit the installation requirements.
Process of removing air and moisture from the refrigerant piping using a vacuum pump.
Instructions for electrical wiring and power supply connections for the unit.
Detailed steps for making electrical connections between indoor and outdoor units.
Procedure to check for refrigerant gas leaks after installation.
How to perform a test run of the air conditioner after installation.
Method for selecting A or B settings for remote control when multiple units are installed.
How to configure the auto-restart function after a power failure.
