To Next PageTo Next Page
Need help?Do you have a question about the Toshiba 2060 and is the answer not in the manual?
Procedures for safely moving and installing the copier unit.
Guidelines for proper installation, including power and environment.
Safety precautions during machine servicing.
Importance of key safety components and their handling.
Importance of checking rating plates and cautionary labels.
Recommendations for disposal of parts and materials.
Guidelines for reassembly after disassembly.
Warning against operating the machine with parts removed.
Steps to prevent damage from static electricity.
Lists error codes and their corresponding machine statuses for troubleshooting.
Explains various self-diagnosis modes and their input codes for testing.
Details input signal checks within specific test modes.
Details output signal checks for various functions using codes.
Describes how to enter and use the adjustment mode for various settings.
Covers setting and changing various special modes via codes.
Procedure for registering or changing user ID codes for access control.
Steps for adjusting the auto-toner sensor, typically after replacing developer.
Procedures for adjusting machine exposure settings for optimal image quality.
Adjustments for paper movement reproduction ratio, aligning values, and registration.
Procedures for checking and adjusting high-voltage outputs and developer bias.
Instructions for replacing and installing the carriage drive wire.
Procedures for adjusting mirrors and lenses for image quality.
Steps to correct image distortion issues.
Procedure to adjust image inclination by moving the original scale.
How to adjust the lens unit for side deviation.
Adjusting light distribution for uniform exposure on front/rear sides.
States no adjustment is necessary for drum/sleeve gap.
Procedure for adjusting the gap between the sleeve and leveler.
Adjustments related to the Automatic Document Feeder unit.
How to adjust ADU side deviation for duplexed copies.
Procedure for adjusting cassette side deviation.
Steps for performing periodic inspections after 80,000 copies.
Procedures for inspection and overhaul after 240,000 copies.
Guidelines for storing toner, developer, OPC drums, and paper.
Precautions for handling, cleaning, and installing OPC drums.
Precautions for handling and checking the drum cleaning blade.
Procedures for checking and replacing the cleaning felt roller.
Guidelines for checking and cleaning heat and pressure rollers.
Precautions and checking for the heat roller cleaning blade.
General