To unlock channels:
1. Press MENU, then press 4 or li_ to display the OPTION menu.
2. Press At, or V to highlight LOCK and then press 4 or I1_to display
the LOCK menu.
3. Use the Channel Number buttons (0-9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
4. Press At, or _F to highlight CH LOCK and press _ or _ to display
the CH LOCK menu.
5. Press _ or I_ to highlight CLEAR and clear al! channels from the
list of locked channels. Press ENTER.
6. Press EXIT to return to normal viewing.
Locking video input
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, VIDEO3, COLORSTREAM) and channels 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel buttons unless you clear the setting.
To set up the video mock:
1, Press MENU, then press _ or _ to display the OPTION menu.
2. Press ,& or V to highlight LOCK.
3, Press _ or I_ to display the LOCK menu.
4, Use the Channel Number buttons (0-9) to enter your PiN code,
then press ENTER. The LOCK menu appears.
5, Press A or '_ to highlight VIDEO LOCK.
6, Press 4 or _ to select:
, OFF: Unlocks all video input
sources.
o VIDEO: Locks VIDEO1, VIDEO2 ................
VIDEO3 and COLORSTREAM.
CR LOCK START
• VIDEO +: Locks VIDEO1, VIDEO2,
VIDEO& COLORSTREAM, channel 3 GAMETIMER OFF
NEWP_NCODE START
and channel 4. This option should be SELECT AY ADJUST_
used if you use the antenna terminal to
play a video tape.
7. Press EXIT to return to normal viewing.
Setting the game timer
With the GAME TIMER feature, you can automatically activate the
VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a
TV game (30, 60, 90 or 120 minutes).
To set up the game timer:
1. Press MENU, then press _1 or I_ to display the OPTION menu.
2. Press At, or T to highlight LOCK.
3. Press ,,_ or _ to display the LOCK menu.
4. Use the Channel Number buttons (0-9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
5. Press At, or T' to highlight GAME TIMER.
6. Press _ or _ to select a time limit (30 minutes, 60 minutes, 90
minutes, 120 minutes or OFF).
7. Press EXIT to return to normal
viewing. After the GAME TIMER is
programmed, the display will appear
briefly every ten minutes to remind you
that the GAME TIMER is operating.
When the programmed time is
reached, the display will change the
channel automatically.
30 _,0 9t) !20
NEWP_NCODE START _"
SELECT _&'_ ADJUST _
Channel
Numbers
Menu/
Enter
Exit
Note.:
After programming WDEO LOCK, change
channe/s or activate the TV/WDEO key before
turning off the telew_sion.
i!ii
Channel
Numbers
-- Menu/
Enter
-- Exit
23