Toshiba 24AF44 - Setting the clock; Setting the ON;OFF timer

Setting the clock
You must set the clock before you can program the ON/OFF timer.
To set the clock: (Example: 8:30 AM)
1. Press MENU, then press 4 or _ to display the OPTION menu.
2. Press ,_, or _ to highlight ON/OFF TIMER.
LANGUAGE ENGLISH
CN LABEL START _"
FAVORITE CR START
V-CHIP START
LOCK START
_ON OFF _ET
COLORSTREAM DVB
SELECT AV ADJUST '_ l_
SET ENTER
3. Press 4 or _ to highlight SET, then press ENTER. The ON/OFF
TIMER menu appears.
4. Press ,_, or V to highlight CLOCK, then press 4 or _ to highlight
the hour position.
12:00A_ CH001
CLEAR
OFFTIMER
SELECT 4 _ ADJUST A _"
END EXIT
5. Press ,_, or T to set the hour, then press _ to highlight the minute
_osition.
Menu/
Enter
Exit
Note:
If the power source for the TV ,isinterrupted (for
example, the power cord is unplugged or a
power failure occurs), you will need to reset the
clock.
SELECT _ _ ADJUST A Y
END EXiT
6. Press A or Y to set the minutes, then press EXiT to return to
normal viewing.
Setting the ON/OFF timer
Setting the on timer
This feature allows you to program the TV to turn on automatically at a
set time. If you program the ON TIMER to 'DAILY," the TV will turn on
every day at the same time to the same channel until you clear the ON
TIMER.
To set the on timer: (Example: Turning on the TV to channel 12 at
7:00 AM, DALLY)
1. Press MENU, then press _ or _ to display the OPTION menu.
2. Press ,_, or V to highlight ON/OFF TIMER.
3. Press ._ or _ to highlight SET, then press ENTER. The ON/OFF
TIMER menu appears.
4. Press ,A or V to highlight ON TIMER and press ,_ or _ to highlight
the hour position.
SELECT 4 _ ADJUST _ V
END EXIT
25
--AT4_
ii
- Menu/
Enter
-- Exit
Note:
After a power failure or disconnection of the
power, the timer settings will be lost.