Toshiba 27A10 - Watching Picture-In-Picture; Displaying a Small Picture

24
Set up
Preparation
Basic Operation
Advanced Operaion
Reference Section
Watching Picture-in-Picture
In addition to the main picture, another TV program or video source being received through the VIDEO input jacks can be
displayed simultaneously as a small picture. This is called PIP (Picture-in-Picture).
Be sure to connect a VCR with the VIDEO/AUDIO cables. See page 6 for details.
3 Select channels for the PIP using the
VCR’s channel keys.
Displaying a small picture
1 Press PIP once to display a small picture.
The 1/9 size window picture will appear.
If you press twice: The 1/16 size window
picture will appear.
TV
CABLE
VCR
MENU/
ENTER
CH RTN
RECALL MUTE
CH
CH
VOL VOL
1
4
7
2
5
8
3
6
9
0
ENT
100
POWER
o
REWPAUSE
FF
SOURCESTILL
PIP
SLOW
PIP CH LOCATE SWAP
STOP
PLAY
REC
TV/VCR
TV/VIDEOFAV CH
A
EXIT
SOURCE
PIP
SWAP
LOCATE
STILL
TV/VIDEO
7
1/16
1/9
PIP
2 Press SOURCE to select the video input
source (“VIDEO1” or “VIDEO 2”) for the
small picture.
The selected source will be displayed in
purple.
TO SELECT PUSH SOURCE
VIDEO 1
VIDEO 2
TV
PIP
To use the PIP CH t s buttons
1 Press TV/VIDEO to select “VIDEO 1” or “VIDEO 2” (main picture
source) and press SOURCE to select “TV” (PIP source)
Picture from TV
Picture from VCR
2 Press PIP CH tor s to select channels for the small picture.
If the V-CHIP Control feature is active
and you try to watch a TV program that
exceeds the rating limits you set, the TV
will enter into the program block mode.
See page 30 for details.
Note:
Signal source input through the COLOR STREAM
terminals cannnot be displayed as a small picture.
Also, when the main picture source is in “COLOR
STREAM”, PIP is not available.
To turn off the small picture, press PIP
– Twice, if you watch the 1/9 size window picture.
– Once, if you watch the 1/16 size window picture.
PIP
24
BLOCKED
PIP CH
t s