Toshiba 27A10 - Connecting a Cable Converter Box and a VCR; Connecting a Satellite Receiver and a VCR

6
Set up
Preparation
Basic Operation
Advanced Operaion
Reference Section
IN
OUT
ANT
S-VIDEO
VIDEO VIDEO
L/
MONO
R
AUDIO
L/
MONO
R
AUDIO
VIDEO
L
Y
R
AUDIO
VIDEO-1 VIDEO-2
C
B
C
R
COLOR
STREAM
INPUT
Satellite IN
S-VIDEO
OUT
VIDEO AUDIO
LR
OUT
IN from ANT OUT to TV
CH3
CH4
S-VIDEO VIDEO AUDIO
LR
IN
OUT
IN
OUT
ANT
S-VIDEO
VIDEO VIDEO
L/
MONO
R
AUDIO
L/
MONO
R
AUDIO
VIDEO
L
Y
R
AUDIO
VIDEO-1 VIDEO-2
C
B
C
R
COLOR
STREAM
INPUT
IN from ANT OUT to TV
CH3
CH4
S-VIDEO VIDEO AUDIO
LR
IN
OUT
OR
IN
IN
OUT
OUT
CABLE
SPLITTER
Connecting Your TV (continued)
Connecting a cable converter box and a VCR
This connection allows you to watch and record basic and premium cable channels, as well as watch video tapes. Tune the
VCR channel to 3 or 4 (whichever channel is vacant in your broadcast area), then use the converter box to change channels.
From Cable
Cable converter box
TV
Stereo VCR
Caution:
●
If you have a mono VCR, connect L/Mono to VCR Audio
OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video connections and
remove the video cable. Do not connect the video cable and
the S-video cable to VIDEO 1 simultaneously.
●
When you use a converter box with your TV, there may be
features that you cannot program using the remote control,
such as blocking channels, and programming your favorite
channels.
Connecting a satellite receiver and a VCR
This connection allows you to watch satellite, video and TV programs.
You can record one TV channel while watching another channel.
From Satellite dish
Caution:
●
You can use a video cable instead of the S-video
cable, but the picture quality will decrease.
Do not connect the video cable and the S-video
cable to VIDEO 1 simultaneously.
Notes:
●
To watch from the Satellite Receiver, the TV
must select VIDEO 1.
●
To watch from the VCR, the TV must select
VIDEO 2.
Satellite Receiver
TV
Stereo
VCR
From antenna
For PIP
Hookup
OUT to
RF Input
on TV