CHANGZHOU WANTAI ELECTRICAL APPLIANCE CO., LTD
User Guide for 3 axis TB6560 driver board
Product Features:
Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset
1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step
Adjustable drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different
stepper motors
Overload, over-current and over-temperature safety - Full protection for your computer and peripheral
equipment
On board current switching - Power output can be set according to specific user requirement
Full closed-type optical isolation to protect the user's computer and equipment
Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be
powered by this output!)
4 channel inputs interface- Can be used for XYZ limit and emergency stop
Professional design - Two stage signal processing with super anti-jamming
Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range
without creep effect
Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop
Universal architecture - Supports most parallel software MACH3, KCAM4, EMC2 etc!
Dip settings:
To Next Page
Need help?
General
