9. Press < or _ to display the Set Rating menu.
10. Press A or v to highlight MPAA Rating, !fimth "YV Rating, or
"YVRating.
11. Press _ to select (or < to deselect) the ratings to be blocked.
Blocked ratings will be marked with "x"; unblocked ratings will
will be m,arked with "if." All ratings higher than the ones that are
selected ("x") are blocked as well. For example, if you block the
MPAA rating R, programs with the higher ratings NC17 and X
will also be blocked.
SET UP
lllltllll0ir r
MOVE [vA] _ELEO'[ 4 _]
12. When you finish selecting the program ratings to be blocked:
• "lb return to the V-Chip menu, press Aor v to highlight
BACK TO V-CHIP MENU, and then press < or _.
• "lb return to normal "YV vi_ving, press EXIT.
MUTE POWER
RECALL
(Z)®®
(Z)®®
©®®
®®° 6"
-- MUTE
-- MENU
-- EXIT
Unblocking programs temporarily
When you try to view a progr,am with a ratings block, a message
appears stating that the program has been blocked because the
program's rating exceeds the set limits. "ib temporarily override the
block and vicxv the program, press MUTE and enter your PIN code.
"lb reset your original ratings blocks, turn the "YV off and then on
_ain.
THIS PROGRAH HAS BEEN BLOCKED_
TV-PG L V
EXCEEDS SET LIHITS
PUSH MUTE TO ENTER PIN
BLOCKING I5 ACTIVE
PLEASE ENTER PIN CODE
TO TEMPORARILY tIN-BLOCK
SELEL'°r [0-9] END [EXIT]
Blocking unrated movies and programs
Some movies and programs ,'ire not rated. You can use the V-Chip
Control feature to block unrated movies and programs.
To block unrated movies and programs:
1. Press MENU.
2. Press < or _ to highlight the SET UP menu.
3. Press Aor v to highlight V-CHIP CONTROL.
4. Press < or _ to display the PIN code entering screen.
5. Use the CHANNEL NUMBERS (0-9) to enter your _)ur-digit
PIN code. After entering the code, the V-Chip Control menu
appears.
6. Press Aor T to highlight ENABLE BLOCKING.
(Continued on next page)
23