Toshiba 32AV83*G - Advanced Picture Adjustments; Base Colour Adjustment; MPEG NR - Noise Reduction; Digital Noise Reduction

38
English
Base Colour Adjustment
The Base Colour adjustment feature allows
the adjustment of individual colours to suit per-
sonal preference. This can be useful when using
an external source. It only can be adjusted when
3D Colour management is set to On.
In the PICTURE menu, press ▲ or ▼ to
select Base Colour Adjustment and
press to enter the submenu.
Press ▲ or ▼ to select an item you want
to adjust and press .
Base Colour Adjustment
BrightnessHue Saturation
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
OK
Edit
OK
Back
RETURN
Press ◄ or ► to select Hue, Saturation
or Brightness.
Base Colour Adjustment
BrightnessHue Saturation
0
Red
Press ▲ or ▼ to adjust the settings as
required.
NOTE: In the PC Input mode, this function is
not available.
Digital Noise Reduction
DNR (Digital Noise Reduction) enables you
to “soften” the screen representation of a weak
signal to reduce the noise effect.
In the PICTURE menu, press ▲ or ▼ to
select DNR.
Press ◄ or ► to select Off, Low, Mid-
dle or High.
NOTE: This function is not available for HDMI
input.
MPEG NR – Noise Reduction
When watching a DVD, the compression may
cause some words or picture elements to
become distorted or pixelated.
Using the MPEG NR feature reduces this ef-
fect by smoothing out the edges.
In the PICTURE menu, press ▲ or ▼ to
select MPEG NR.
Press ◄ or ► to select Off, Low, Mid-
dle or High.