46
English
Equipment Control
The HDMI-LINK mode on the television’s
remote control allows the control of connected
HDMI-LINK equipment being watched.
To control the HDMI-LINK input source, rst
select the equipment with HDMI-LINK input
source selection, then switch the mode on the
remote control to HDMI-LINK and press any
buttons.
The available functions are dependent on the
equipment connected. Not all the remote con-
trol keys may be available. Please refer to the
operation manual for each piece of equipment
connected.
NOTE: The television features that can be con-
trolled by the connected equipment are:
Standby, Volume and Sound Mute.
HDMI-LINK Controls
This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba
HDMI-LINK compatible equipment from the television’s remote control.
Note: Not all Toshiba products currently support HDMI-LINK.
Input Source Selection
When any equipment using CEC technology
is connected, the HDMI-LINK icon will appear
in the input source list allowing selection of
individual devices.
Press . A list will appear on screen showing
modes and all stored external equipment.
TV
1
2
3C
HDMI1
HDMI2
MEDIA
PC
Inputs
To Next Page
Loading...
