(3/3)
(To Check New FW version)
13. Press "MENU" key then using “◄” or “►” key until “Setup” page shows on the screen.
14. Press "▲ or ▼" key until you find "System Information" with focused blue bar.
15. To show the information, click "OK".
From out side Input keypad upgrade.
If don't care the model name mechanism whether exist .
- The .bin name should be ”MstarUpgrade.bin” on USB disc
1. Copy MstarUpgrade.bin to the USB storage device.
USB storage device support FAT32 format only
2. Insert your USB storage device to the USB slot of the TV set.
3. Press and hold Input of TV side key.
4. AC on, until LED green light flash then release input key.
5. TV will reboot after upgrade finish.
To Next Page
Loading...
