101
Setting up your TV
Other HDMI
TM
CEC functions
TV Auto Power If a HDMI
TM
CEC device is turned on, the TV turns on automatically.
Auto Standby If the TV is turned off, the TV will send a message to turn off all of the HDMI
TM
CEC devices connected to the TV.
Amplifier
Control
If Amplifier Control is set to On, you can adjust the sound volume or turn off the
sound using the remote control.
Initial Speaker
Setting
From this item, you can set your audio output preference to the TV speakers
or the audio receiver speakers. When this item is set to Receiver, the TV
remote can be used to adjust or mute the volume of the audio. This item will
be grayed out when
Amplifier Control is set to Off.
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver’s speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
Setting up HDMI
TM
CEC
If you select Enable HDMI CEC Off, the other items will be grayed out.
v
v
v
v
To Next Page
Loading...
