EasyManuals Logo

Toshiba 32L220U19 Quick Setup Guide

Toshiba 32L220U19
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
START HERE
How do I attach the stand to my TV? (not for wall mounting)
You’ll need: Soft surface and a Phillips screwdriver.
Carefully place your TV face-down on a cushioned, clean surface.
Align the screw holes on the TV stands with the holes on the bottom of your TV, then secure each stand to your TV with two of
the provided screws.
1
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“hazardous voltage” within the product’s enclosure, which may be
of sufficient magnitude to induce a risk of electric shock to persons.
The exclamation mark inside an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
FIND YOUR USER GUIDE ONLINE!
Go to www.tv.toshiba.com and search
for 32L220U19.
Quick Setup Guide | 32L220U19
32" 720p, 60Hz, LED TV
Remote control and two AAA batteries
ST4 screws (25 mm length)
(4 pcs.)
Your TV has four VESA mounting holes on the back. If you attach a wall-mount bracket
to the back of your TV, the bracket must be securely attached, using all four holes.
If you do not use all four mounting holes, your TV may fall and cause property damage
or personal injury. See the documentation that came with your wall mount for complete
mounting instructions.
WALL MOUNT
How do I prepare my TV for wall mounting? (not for use with a TV stand)
You’ll need: Soft surface and a Phillips screwdriver.
Before you mount your TV, make sure that:
You remove the stand legs.
The bracket supports the weight of your TV.
A Carefully place your TV face-down on a cushioned, clean surface.
B
See the instructions that came with your wall mount for more information about how to
correctly mount your TV.
A
B
INCLUDED ACCESSORIES
MAKING CONNECTIONS
How do I watch TV (cable, satellite, or antenna) or connect a device such as a DVD or Blu-ray disc player or game console?
Features
Front
2
Coaxial
(GOOD)
AV (GOOD)
HDMI® (BEST)
Best video quality
Note: Connect an ARC-enabled home theater
receiver to the HDMI IN 1 (ARC) jack.
Stands
ST4 type (25 mm) screws
OR
Before using your new product, please read these instructions to prevent any damage.
VESA Mounting Pattern
VESA mount (mm): 100 × 100 – M4 x 12mm type screws (4 pcs)
AAA
+
AAA
+
Back
Remote sensor
Power On/Standby LED
AUDIO/VIDEO OUT
C
M
Y
CM
MY
CY
CMY
K
Toshiba_32L220U19_17-0908_QSG_V1_EN_Final.ai 1 12/22/2017 9:55:10 AMToshiba_32L220U19_17-0908_QSG_V1_EN_Final.ai 1 12/22/2017 9:55:10 AM

Other manuals for Toshiba 32L220U19

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba 32L220U19 and is the answer not in the manual?

Toshiba 32L220U19 Specifications

General IconGeneral
Screen Typeled
Wall Mount100mm x 100mm
Tunerdigital
Screen Size31.5 inches, 32 inches
Refresh Rate60hz
HDRno
Built-In Speakersyes
Speakers Output12 watts
USB Ports1
RF Antennayes
Headphones Outputyes
Digital Optical Audio Outputs1
Component Video Inputs0
Composite Video Inputs1
DVI0
Remote Controlstandard
3Dno
Power Consumption58 kilowatt hours
Depth with Stand7.1 inches
Height with Stand18.3 inches
Width with Stand28.8 inches
Net Weight with Stand8.8 pounds
Depth without Stand3.2 inches
Height without Stand17.2 inches
Net Weight without Stand8.6 pounds

Related product manuals