Self Diagnostic Function
1.Press "9" button on remote control during display of adjustment menu in the service
mode. The diagnosis will begin to check if interface among IC's is executed properly.
2.During diagnosis, the following displays are shown.
All Black
All White
(1)Firmware :
Version information of microprocessor
In case of file name : WL66_EU and Version : 0326 indicates [WL66_EU_0326].
(2)Time : Total hour of turn the TV on. (Unit : H)
(3)Bus line : -- "OK" is normal
SCL-GND (Red indication) : SCL-GND short circuit
To Next Page
Loading...
