LED Indications
The Green and Red LEDs on the TV (at the bottom center of the TV) indicate the TV's
status, as described below.
l Red ON (solid) and Green OFF = The TV power cord is plugged in.
l Green ON (solid) and Red ON = The On timer is operating.
(tuning adjustment etc.)
D1 (bit1)SETUP MENU Disable Enable
D0 (bit0)HOTEL Mode On (Enable the setting of D1
to D7)
Off (Normal)
LED Indication Condition Solution
1Green is OFF;
Red blinks continuously at 0.5-
second intervals.
Abnormal operation Turn OFF the TV and unplug
the power cord.
Plug the power cord in again
and turn ON the TV.
2Green is OFF;
Red blinks continuously at 1-
second intervals.
Abnormal operation of
BUS line.
Turn OFF the TV and unplug
the power cord.
Plug the power cord in again
and turn ON the TV.
To Next Page
Loading...
