Setting Hotel Mode
Enter to service mode and select Hotel Mode menu by pressing P or P .
After selecting Hotel Mode, press + to enter details setting in Hotel Mode.
To select menu, press P or P and press OK to enter the adjustment menu of OPT2.
To move the cursor in the adjustment, press + or -.
1.By pressing P or P , OPT2 setting will change the value either 1 or 0 on selected
items as follows;
Super Live 2
Cinema 2
4:3
Super Live 1
Cinema 1
Subtitle
14:9
(8)OTHER STATUS :
Other status information : Display three numbers of 2 byte data.
OPT2 FUNCTION DESCRIPTION 1 0 (Normal)
D7 (bit7)POS1 stored program will appear in
forced when turn ON the main power
POS1 in forced Disable
D6 (bit6)VIDEO1 stored program will appear
in forced when turn ON the main
power
VIDEO1 in forced Disable
D5 (bit5)FRONT Key Disable Enable
D4 (bit4)Front keys except input selector key
(Video/TV)
Disable Enable
D3 (bit3)User remote control operation Disable
(Service mode and Super
User mode may possible to
setting only)
Enable
D2 (bit2)Language display except SETUP
MENU language
Disable
Display the language only
Enable
To Next Page
Loading...
