Connecting a cable converter box
This connection allows you to watch basic and premium cable
channels.
To use the TV's features, select ANT-1. To view premium channels,
select ANT-2, tune the TV to channel 3 or 4 (whichever channel is
vacant in your area), and use the converter box to change channels.
You will need:
• three coaxial cables (one or more may be provided by your cable
company)
Note:
When you use a converter box with your TK,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.
From Cable
TV
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, watch videotapes, and record one channel while
watching another channel. To use the TV's features, select ANT-1.
To view premium channels or record with the VCR, select ANT-2,
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), and use the converter box to change channels.
You will need:
• four coaxial cables (one or more may be provided by your cable
company)
• one set of standard A/V cables
TV
From Cable
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
ff you have an S-VHS VCR, use an S-video
cable (in the S-video jacks) instead of a
standard video cable. Do not connect a
standard video cable and an S-video cable to
Video- ] (or Video-2) at the same time, or the
picture performance will be unacceptable.
When you use a converter box with your TK,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and blocking
channels.
I Theunauthorizedrecording,use,distribution,
orrevisionoftelevisionprograms,videotapes,
DVDs,andothermaterialsis prohibitedunder
theCopyrightLawsoftheUnitedStatesand
othercountries,andmaysubjectyoutocivil
andcriminalliability.
To Next Page
Loading...
