Toshiba 37AV505D - Page 130

OP6
OP7
OP8
OPT6 FUNCTION DESCRIPTION 1 0 (Normal)
D7 (bit7) Enable mode that POS or VIDEO program
number will be appeared in forced when turn
ON the main power
Enable Disable
D6 (bit6) ~
D0 (bit0)
POS or VIDEO program number 0 ~ 127 [decimal] (Normal: 0)
POS number: 0 ~ 99
VIDEO number: 100 ~ 127
(DTV = 100, VIDEO = 101,
VIDEO = 102..)
100 is used as ATV when
DTV option is disable.
OPT7 FUNCTION DESCRIPTION 1 0 (Normal)
D7 (bit7)
Enable mode that speaker volume will be set in
forced when turn ON the main power
Enable Disable
D6 (bit6) ~
D0 (bit0)
Forced speaker volume 0 ~ 100 [decimal] (Normal: 0)
Value above 100 is no effect.
OPT8 FUNCTION DESCRIPTION 1 0 (Normal)
D7 (bit7) ~
D3 (bit3)
- (no use) - -
D2 (bit2) Enable mode that picture mode will be set in
forced when turn ON the main power
Enable
(Display the
language only)
Disable
D1 (bit1) ~
D0 (bit0)
Forced picture mode 0 [dec]: Dynamic (mode-1)
(Normal)
1 [dec]: Standard (mode-2)
2 [dec]: Mild (mode-3)
3 [dec]: Memory (mode-M)