OP2
VOLUX
Set VOLUX as following.
1) Set speaker volume to 100. (Any value is OK, but 100 is better to check sound level.)
2) Down value of VOLUX until finding suitable sound volume level.
OPT2 FUNCTION DESCRIPTION 1
0
(Normal)
D7 (bit7) - (no use) - -
D6 (bit6) Enable mode that TV On will be appeared in
forced when turning the main power ON
Enable Disable
D5 (bit5) FRONT Key Disable Enable
D4 (bit4) All keys except input selector key
(Video/TV)
Disable Enable
D3 (bit3) User remote control operation Disable
(Service mode and
Supere
User mode may
possible to setting
only)
Enable
D2 (bit2) Disable SET UP MENU except language.
(tuning SETUP MENU)
Disable
(Display the language
only)
Enable
D1 (bit1) Disable SETUP MENU Disable Enable
D0 (bit0) HOTEL Mode On (Enable the setting
of D1 from to D7)
Off
(Normal)
VOLUX FUNCTION DESCRIPTION 1 0 (Normal)
D7 (bit7) ~
D0 (bit0)
Max Limiter of Volume Control 0x00 ~ 0x7F (Normal: 0x7C)
To Next Page
Loading...
