How to fix no output from one speaker on Toshiba 40L310U LED TV?
If there's no output from one of the speakers on your Toshiba LED TV, adjust the audio balance in the settings. Also, ensure that the audio cables are connected correctly and securely to your TV.
How to fix audio noise on Toshiba LED TV?
If you're experiencing audio noise with your Toshiba LED TV, other devices (like surround sound receivers, external speakers, fans, or hair dryers) might be interfering. Try turning off one device at a time to find the source, then move it further away from the TV.
How to fix only snow appearing on Toshiba 40L310U LED TV screen?
If your Toshiba LED TV screen only shows snow (noise), try switching to another channel. Also, make sure the antenna or cable TV is connected correctly. If you're using an antenna and the signal strength is weak, adjust the antenna or use a high-directional outdoor antenna or a set-top antenna with a built-in amplifier.
Why is my Toshiba LED TV showing a 'no signal' error message?
If your Toshiba LED TV displays a 'no signal' message, make sure you've selected the correct input for your device by pressing the INPUT button. If you're using a cable or satellite box, use its remote to change channels.
How to fix poor picture on Toshiba 40L310U?
If your Toshiba LED TV has a poor picture, ensure the room isn't too bright, as light reflecting off the screen can make the picture difficult to see. Also, if an S-VHS camera or camcorder is connected while another device is on, it may cause a poor picture; try turning off other devices.
How to fix good sound but poor color on Toshiba 40L310U?
If your Toshiba LED TV has good sound but poor color, try adjusting the contrast, color, and brightness settings.
How to fix dotted lines or stripes on Toshiba 40L310U screen?
To address dotted lines or stripes on your Toshiba LED TV screen, try these steps: * Ensure the antenna or cable TV is securely connected. * If using an antenna, adjust it, or consider a high-directional outdoor antenna with an amplifier if the signal is weak. * Check that the video cables are connected correctly and securely; try a new set if necessary. * Other nearby devices might be causing interference. Try turning them off one by one to identify the source and then move it further away from the TV.
What to do if my Toshiba LED TV is not displaying video from a connected CEC device?
If your Toshiba LED TV isn't displaying video from a connected CEC device, verify the following: * The HDMI cable is securely connected to both the TV and the device. * The device is connected via HDMI. * The device is indeed a CEC device. * The correct video input source is selected on the TV. * The HDMI-CEC Control feature is enabled on the TV. * Try adjusting the TV picture settings.
How to fix poor picture quality on some channels of Toshiba 40L310U?
If your Toshiba LED TV has good picture quality on some channels but poor quality on others, the issue might be a weak signal from the broadcaster or cable TV provider. If you're connected to cable without a set-top box, consider installing one to improve signal reception and picture quality. Contact your cable TV provider for options.
How to fix dark or poor picture, but good sound on Toshiba 40L310U?
If your Toshiba LED TV has a dark or poor picture but the sound is good, here are a few things to try: * Try switching to another channel to rule out broadcast issues. * Check that the antenna or cable TV connection is secure. * Adjust the brightness settings. * Change the aspect ratio by pressing the PIC SIZE button. * If using an antenna, adjust it or consider a high-directional antenna with an amplifier if the signal is weak. * Ensure the video cables are properly connected or try a new set of cables.
General| Screen Type | led |
|---|---|
| Wall Mount | 200mm x 200mm |
| Screen Size | 39.5 inches, 40 inches |
| Refresh Rate | 60hz |
| Brightness | 250 candela per square meter |
| Surround Sound | dts trusurround |
| Speakers Output | 14 watts |
| Number Of Speakers | 2 |
| USB Ports | 1 |
| RF Antenna | yes |
| Network | none |
| Headphones Output | no |
| Digital Optical Audio Outputs | 1 |
| Analog Audio Outputs | 1 |
| Component Video Inputs | 1 |
| Composite Video Inputs | 1 |
| 3D | no |
| Power Consumption | 108 kilowatt hours |
| Depth with Stand | 7.5 inches |
| Height with Stand | 22.3 inches |
| Width with Stand | 35.6 inches |
| Net Weight with Stand | 21.8 pounds |
| Depth without Stand | 2.7 inches |
| Height without Stand | 20.2 inches |
| Net Weight without Stand | 21.4 pounds |
Guidelines for safe TV placement and mounting to prevent tip-overs and injuries.
Lists 18 numbered safety instructions for operation and installation.
Warning about electric shock and the need for qualified service personnel.
Advice on unplugging during lightning and power line safety for outdoor antennas.
Instructions for safely handling the TV's glass screen and liquid crystal panel.
Steps to attach the stand legs to the TV using provided screws.
Guidance on using VESA mounting holes and attaching the wall-mount bracket securely.
Managing CEC-compatible devices for synchronized power and playback control.
Customizing picture modes, brightness, contrast, color, tint, and sharpness.
Changing picture size and adjusting aspect ratio automatically or via 4:3 Stretch.
Customizing balance, bass, treble, sound modes, and speaker output.
Configuring ratings blocking, input locking, timers, and locking TV buttons.
Setting rating limits, temporarily unlocking programs, locking inputs, and channels.
Setting game time limits and locking TV control buttons using a PIN.
Troubleshooting steps for common picture problems and audio issues like no sound or noise.
Details the terms, conditions, duration of the warranty, and how to obtain service.
List of conditions and damages specifically not covered by the product warranty.
To Next Page