FIRMWARE UPDATING
Software updating procedure (using USB Mass-storage
device)
1. Copy APP code upgrade.pkg to USB flash disk (root folder).
Figure 1 USB Mass-storage device
2. Plug the USB device into the USB slot on the TV.
Figure 2 USB slot
3. Software updating wizard will be displayed. Select "YES" and press "OK" button on
the remote control to start the updating.
Figure 3 Updating wizard 1
Figure 4 Updating wizard 2
4. Turn the TV off/on to install the software automatically.
5. Unplug USB flash disk and Turn the TV off/on again.
To Next Page
Loading...
